PowerShield Centurion RT 1000VA/ 900W Double Conversion True

Description

 

POWERSHIELD Centurion RT 1000VA/ 900W Double Conversion True Online UPS. Power Factor 0.9 Rack/Tower Design (2RU) Hot-Swappable Battery. EBM Compatible to Extend Runtime.

The Centurion RT has an energy saving Advanced ECO mode, which allows the unit to operate at very high efficiency, up to 98%. When the utility mains input voltage is within the ECO range the UPS saves energy by passing the mains supply directly through to the load, while the inverter continues to operate in a passive mode.

The Centurion RT incorporates hot-swappable internal battery packs which can be accessed via the front panel for maintenance changes, keeping the UPS operational during battery replacement. Battery backup time can be increased by simply adding additional Battery Banks. The standard Centurion RT has been designed with a larger charger than others ensuring rapid recharge times when adding additional battery banks.

The LCD display panel is readily viewable whether the UPS is horizontal or vertical. The display Menu is simple and intuitive. It displays all critical and noncritical parameters, including the estimated battery backup time remaining. This UPS comes with programmable power management outlets allowing the user to control load segments, thereby extending battery backup times to mission-critical devices by shutting down noncritical items.

The Centurion RT has been meticulously developed by Power Shield engineers to address absolutely all requirements and features as has been demanded by the sophisticated Australian power consumer and hence the Centurion RT stands in a class of its own, as a world-leading UPS technology.

 

Features

• Surge Protection Best in its Class – 984J/22000A
• True online double-conversion
• Power factor 0.9
• Extra large charger for rapid recharging
• Option to add additional battery banks to increase backup time
• User-friendly, electronic easy-shift LCD display
• Rack or Tower design
• Advanced ECO mode for energy saving
• Generator compatible
• Programmable power management outlets
• EPO – Emergency Power Off function
• Hot-swappable battery design
• USB, RS232, SNMP, Modbus, Environmental Monitoring and AS400 multiple communications available

 

INPUT
Voltage Range	Low Line Transfer	160Vac / 140Vac / 120Vac / 110Vac ± 5% (based on load percentage 100% – 80% / 80% – 70% / 70% – 60% / 60% – 0)
	Low Line Comeback	170Vac / 150Vac / 130Vac / 120Vac ± 5%
	High Line Transfer	300Vac ± 5%
	High Line Comeback	290Vac ± 5%
Frequency Range		40Hz – 70Hz
Phase		Single phase with ground
Power Factor Correction		>0.99 @ nominal voltage (100% load)
OUTPUT		Output Power Factor: 0.9
Output Voltage (AC Mode)		240Vac (Selectable 208/220/230/240Vac)
Voltage Regulation (Bat. Mode)		±1%
Frequency Range (Batt. Mode)		50Hz or 60Hz ±1Hz
Current Crest Ratio		5:1 (max.)
Transfer Time		4ms (Typical)
EFFICIENCY
ECO Mode (Advanced)		98%
Battery Mode		86%
BATTERY
Battery Type & Number		12 V*9AH (x3)
Typical Recharge Time		4 hours recover to 90% capacity
Charging Current (max.)		Standard Model -1.5Amp, Long Run Model – 1Amp/2Amp /4Amp/6Amp (factory default is 6Amp)
PROTECTION
Full Protection		Overload, discharge, thermal, short circuit and overcharge protection
Surge Protection		984 Joules / 22000 Amps
COMMUNICATIONS & MANAGEMENT
Interface		USB or RS232 as standard, Intelligent slot for PSSNMP, PSModbus or PSAS400 dry contact
Software		PowerShield NetGuard® software – supports Windows based operating systems, Linux, Unix and Mac
LCD Display/Alarm		UPS Status, Load & Battery Level, Input/Output Voltage, Batt. Time Remaining and Fault Indicators
Audible Alarm		Battery Mode, Bypass Mode, Low Battery (Batt. Mode), Fault, Overload
PHYSICAL
Dimension (D x W x H)		480 x 438 x 88 mm
Weight		18kg
OPERATING ENVIRONMENT
Temperature		0 – 40°C
Humidity		20 – 90% (RH Non-condensing)
Noise Level		< 50dBA @ 1 Meter
COMPLIANCE
Safety		EN62040-1-1 2003, IEC60950-1-1
EMC		EN62040-2 2006
RoHS		Directive 2011/65/EU