Description
POWERSHIELD Commander Tower 1100VA
The PowerShield Commander is a sophisticated pure sine wave, line interactive UPS. On top of featuring Automatic Voltage Regulation (AVR), itĀ providesĀ a Pure Sine Wave output while in backup mode. ThisĀ UPS is a cost-effective solution for protecting applications such as networking, telecom, security and motors.
Features:
- Pure Sine Wave Output
- Output Power FactorĀ 0.9
- Free, programmable Power Management
- Ultra Modern, Informative LCD ā Shows Battery Time Remaining
- ECO Mode
- Smart AVR
- Emergency Power Off Function
- Multiple Communication Available with faster SNMP Card
| Capacity | 1000VA/990W |
| Topology | Line Interactive, Pure Sine Wave |
| INPUT | |
| Nominal Voltage | 240V AC |
| Acceptable Voltage Range | 162V~290V AC |
| Frequency | 50/60Hz Ā±5Hz (auto sensing) |
| OUTPUT | |
| Voltage Regulation (AC Mode) | 240VĀ AC (Selectable 208/220/230V AC) Ā± 10% AVR |
| Voltage Regulation (Batt. Mode) | Ā± 1.5% (before battery alarm) |
| Frequency Range (Batt. Mode) | 50Hz or 60Hz Ā±1Hz |
| Current Crest Ratio | 3.1 |
| Total Harmonic Distortion | 2% max @ 100% linear load, 5% max @ 100% non-linear load (before low battery alarm) |
| Transfer Time | 6ms (Typical), 10ms max. |
| Waveform (Batt. Mode) | Pure Sine Wave |
| EFFICIENCY | |
| AC Mode | 98% (Advanced ECO design) |
| Battery Mode | 89% |
| BATTERY | |
| Standard Model | Battery Type & Number:Ā 12V/9AH (x2) Recharge Time:Ā 4 hours recover to 90% capacity |
| PROTECTION | |
| Full Protection | Overload, thermal, short circuit, discharge and overcharge protection |
| Surge Protection | 1968J/39000A |
| ENVIRONMENT | |
| Operation Temperature | 0Ā°C~40Ā°C |
| Relative Humidity | 0%~90% (RH non-condensing) |
| Noise Level | <45dB |
| COMMUNICATIONS & MANAGEMENT | |
| Interface | USB and RS-232 as standard, an Intelligent slot for PSSNMP, PSModbus or PSAS400 dry contact |
| Software | PowerShield NetGuardĀ® software – supports Windows-based operating system, Linux, Unix and Mac |
| LCD display | AC mode, Batt. Mode, Load Level, Input Voltage, Output Voltage, Overload, Fault, Battery Replacement, Low Batt., Batt. Time Remaining |
| Audible alarm | Battery Mode, Low Battery (Batt. Mode), Battery Replacement, Fault, Overload |
| PHYSICAL | |
| Dimensions (D x W x H) | 397 x 145 x 220mm |
| Weight | 12.9/14.4kg |
| COMPLIANCE | |
| Safety | EN62040-1 -1 2003, IEC 60950-1 -1 |
| EMC | EN62040-2 2006 |
| RoHS | Directive 2011/65/EU |
Reviews
There are no reviews yet.